Aluminium Foil for Beer Mark Packaging 8079-O

12/15 2025

Aluminium Foil for Beer Mark Packaging 8079-O
High-Barrier Protection for Premium Beer Brands

When brewers talk about “beer quality,” they usually focus on hops, malt, and fermentation. But the quality story doesn’t end at the bottling line. The closure – especially the beer mark (crown cork liner) aluminium foil – is often the last defense between a carefully crafted beer and the outside world.

Aluminium Foil 8079-O is one of the most reliable materials for beer mark packaging. It combines excellent barrier performance, high flexibility, clean surface, and stable chemical properties – all essential for preserving taste, carbonation, and shelf life.

Below is a clear, technical yet readable overview tailored for purchasing managers, packaging engineers, and brand owners.

1. What Is 8079-O Aluminium Foil for Beer Mark Packaging?

• Alloy: 8079
• Temper: O (fully annealed, soft)
• Application:
  • Beer bottle crown cork liners
  • Decorative beer cap “marks”
  • Inner seals / liners for beverage closures

In beer packaging, this foil is typically laminated with paper or film and then used as an inner seal or decorative top layer on crowns. It must:

• Form well under high-speed pressing and curling
• Seal reliably to cork, plastic, or composite liners
• Stay stable in contact with beer vapors and humid environments
• Protect from light, oxygen, and contamination

2. Why Use Alloy 8079-O for Beer Mark Packaging?

2.1 High Barrier Performance

Compared with common packaging alloys like 8011, 8079 has higher elongation and better barrier properties:

• Oxygen barrier: Prevents oxidative flavor changes (staling)
• Moisture barrier: Reduces water ingress and CO₂ loss
• Light barrier: Protects light-sensitive compounds (especially in pale beers)

For breweries, this means:

• More stable flavor over shelf life
• Better protection in warm, humid, or long-distance logistics
• Consistent performance across production batches

2.2 Soft Temper (O) for Perfect Forming

Beer crowns are produced at very high speeds and involve:

• Deep drawing
• Curling
• Crimping onto the bottle neck

O-temper (soft, fully annealed) allows:

• Excellent formability without cracking
• Consistent crimping around the bottle lip
• Good resilience to mechanical stress during capping and transport

This is critical for:

• Leak-free seals
• Lower scrap rates on high-speed lines
• Clean, smooth appearance of the cap and mark

2.3 Clean Surface and Good Printability

Beer marks are brand carriers – small, but visually important. 8079-O foil offers:

• Clean, smooth surface suitable for
  • Color printing
  • Lacquering
  • Embossing
• Good adhesion with coatings and inks
• Controlled oil and moisture content for stable lamination and sealing

This makes it ideal for:

• Premium brand logos
• Special editions / seasonal labels
• Anti-counterfeit designs (micro text, emboss, special inks)

3. Typical Product Parameters

Below values are representative and can be customized based on your specification / standard.

3.1 Basic Specifications

• Alloy: 8079
• Temper: O
• Thickness range: 0.006 – 0.020 mm (6 – 20 μm)
  • Common for beer mark: 9–15 μm
• Width: Up to 1600 mm (or as required by cap-making lines)
• Inner core: Paper or aluminum core, typically 76 mm or 152 mm ID
• Coil OD: According to customer’s line and handling capacity

3.2 Mechanical Properties (Reference Values)

*Exact values depend on thickness and agreed standard.

4. Chemical Composition of Alloy 8079

8079 is an aluminium alloy with higher iron and silicon content than pure 1xxx series, giving it better strength and barrier properties while maintaining formability.

Typical Chemical Composition (wt%)

These limits are usually aligned with EN 573 / GB / ASTM specifications for 8079.

What this means for beer packaging:

• Low copper and iron control reduce risk of metallic off-flavors
• Balanced Fe and Si give strength while maintaining foldability
• Good corrosion resistance under typical beer storage conditions

5. Tempering & Metallurgical Control

5.1 O Temper: Why It Matters

O-temper foil is fully annealed after cold rolling:

• Grain structure is softened
• Internal stress is minimized
• Formability and bendability are maximized

For beer mark packaging, this translates to:

• Clean crimping around the crown cork without tearing
• Reduced risk of delamination in laminated structures
• Stable behavior on high-speed automated lines

5.2 Annealing & Surface Treatment

Producers typically apply:

• Controlled annealing cycles
  • Ensure uniform mechanical properties
  • Reduce residual lubricants
• Surface cleaning & tension control
  • Optimizes adhesion to primers, coatings, or adhesives
  • Ensures consistent print quality and lamination bond

Optional:

• Chromate-free conversion coatings or
• Special primers for food-contact and better corrosion performance

6. Implementation Standards & Quality Requirements

Aluminium foil for beer mark packaging is usually produced in accordance with:

• EN / GB / ASTM standards for aluminium foil (e.g., EN 546, ASTM B479 or equivalent)
• Food-contact regulations, such as:
  • EU Regulation (EC) No 1935/2004
  • FDA 21 CFR (USA) where applicable
  • Local food safety standards in export markets

quality control points:

1. Thickness tolerance

   • Tight control for stable sealing and mechanical behavior

2. Pinhole control

   • Minimized pinholes for maximum barrier
   • Optical & electronic inspections for critical applications

3. Surface quality

   • No rolling defects, black spots, oil stains, or corrosion marks
   • Uniform brightness and texture

4. Degreasing level

   • Low residual oil, suitable for printing, coating, and lamination

5. Odor neutrality

   • No foreign smell, neutral behavior in contact with beer vapors

7. How 8079-O Improves Beer Packaging Performance

From a practical, brewery-focused viewpoint, 8079-O foil helps in three main areas:

7.1 Taste Protection

• Strong barrier reduces oxygen ingress and CO₂ egress
• Prevents absorption of external odors and moisture
• Stable, clean material avoids introducing flavor defects

7.2 Brand Image & Differentiation

• High-quality printable surface supports:
  • Sharp logos, fine lines, and metallic effects
  • Promotional graphics and seasonal editions
• Embossing and special varnishes add a premium look on caps

7.3 Production Efficiency

• Good formability in O temper minimizes breaks and waste
• Uniform mechanical properties support high-speed crown lines
• Stable coil geometry and surface reduce machine stoppages

8. Typical Supply Forms for Beer Mark Producers

Suppliers can provide 8079-O beer mark foil as:

• Bare foil for your own:
  • Priming
  • Printing
  • Laminating
• Pre-lacquered foil ready for:
  • Printing or direct use in cap production
• Pre-laminated structures, such as:
  • Foil + paper
  • Foil + PET / PP film
  • Multilayer composites tailored to your capping system

Customization options:

• Thickness & width according to your die-set
• Specific mechanical property window (tensile / elongation)
• Surface roughness / wettability tuned for your ink and adhesive system

9. Quick Selection Checklist for Buyers

When sourcing Aluminium Foil 8079-O for Beer Mark Packaging, confirm with your supplier:

1. Alloy & Temper: 8079-O, with certificate
2. Thickness & tolerance: e.g. 12 μm ± 5% (or your standard)
3. Mechanical properties: Tensile, elongation tailored to your equipment
4. Pinhole level: According to barrier requirement for your beer and shelf life
5. Food-contact compliance: Certificates for your target markets
6. Surface condition: Degreased, suitable for your coating/lamination/printing process
7. Coil specs: Core ID, OD, weight per coil, packaging method

Aluminium Foil 8079-O is a specialized, high-barrier, soft-temper foil ideally suited for beer mark and crown cork liner applications. Its combination of:

• Excellent formability
• Strong barrier to oxygen, moisture, and light
• Clean surface and printability
• Stable, food-safe chemical composition

makes it a reliable choice for breweries and closure manufacturers who want to protect beer quality and enhance brand image while maintaining smooth, high-speed production.

8079   

https://www.al-sale.com/a/aluminium-foil-for-beer-mark-packaging-8079-o.html