3003 h14 color coated aluminum sheet


Aluminum sheets have always been a cornerstone in modern manufacturing, construction, and design industries. Among the myriad alloys available, the 3003 H14 color coated aluminum sheet stands out, not just for its scientifically engineered composition but for the way it synergistically combines technical precision and functional artistry.

the 3003 Aluminum Alloy – Chemistry with Performance

At the heart of these sheets is the 3003 aluminum alloy, an Al-Mn alloy characterized by roughly 1.0–1.5% manganese content that imparts corrosion resistance superior to that of commercially pure aluminum. In addition, its small silicon and copper traces (typically under 0.1%) slightly augment the alloy’s strength without sacrificing ductility. The base chemical composition is approximately:

ElementComposition (%)
AluminumBalance
Manganese1.0 – 1.5
Copper≤ 0.10
Silicon≤ 0.6
Iron≤ 0.7
Zinc≤ 0.10
Magnesium≤ 0.10
Chromium≤ 0.10
Titanium≤ 0.15

This precise balance is the foundation, enabling good formability, sheet strength, and dreadfully important resistance to corrosion, especially relevant when exterior exposure is anticipated.

Decoding the H14 Temper – Cold Work That Locks Strength

The H14 temper designates a proprietary strain hardening process following which the sheet achieves a partial hardening (approximately 1 on a scale where half-hard is a 4) through cold working without any heat treatment. This clarity in temper impacts:

  • Tensile Strength: Typically ranges around 190-270 MPa.
  • Elongation (ductility): Around 2-4%, providing a fine balance for shape-retention.
  • Good surface hardness and resistance to minor abrasion.

Applied to aluminum flat sheets, it ensures mechanical sturdiness adequate for precision bending and retention of curvature under load, delivering superior form reliability.

The Artistic and Functional Charm of Color Coating

Beyond bare metal, color coating adds transformative benefits to the 3003 H14 aluminum sheet. The color coating commonly involves advanced polymeric paints such as polyester or PVDF (polyvinylidene fluoride), carefully laminated under stringent conditions to bond with the substrate.

Benefits from this fusion include:

  • Outstanding Self-Cleaning and Weather Resistance: PVDF coated sheets resist ultraviolet (UV) degradation, maintain pigment retention for over 20 years, and display robust cleaning via rainfall or maintenance.
  • Enhanced Corrosion Resistivity: The organic coating supplemented by the alloy forms a formidable defense against oxidation, particularly in environments with industrial pollutants or near coastlines.
  • Vivid Aesthetic Variety with Consistent Uniformity: Architects and designers can choose countless RAL or custom color standards; the finish remains wrinkle, blister, and chalk resistant under tertiary environmental stress.
  • Low Maintenance: Ideal for cladding in infrastructural applications needing longevity with fewer refurbishments.

Engineering Parameters & Standards Adherence

When specifying or ordering 3003 h14 color coated aluminum sheet, particular control parameters and standards must be present to ensure authenticity and functionality:

ParameterTypical ValueRelevant Standards
Thickness0.18 mm – 3.0 mmASTM B209, EN 485
WidthUp to 1600 mm standardCustomized cutting available
Tensile Strength (σb)190 – 270 MPaASTM B209, JIS H4000
Elongation (%)2 – 4%ASTM B209
Surface FinishPVDF or Polyester coatingAAMA 2605 (if PVDF used)
Adhesion & Pencil Hardness≥ 100% adhesionISO 2409
Bending RadiusApproximately 2-3× thicknessLiterature/vendor specific

Coating thickness is generally calibrated between 15 μm and 25 μm, ensuring durability without impacting the flexibility and cold-state strength significantly.

Applications from a Distinct Operational Lens

Diverging from the typical list of architectural cladding and heat exchangers, new readings of the 3003 h14 color coated sheet bring to attention nuanced application areas:

1. Dynamic Facades and Responsive Architectural Screens

Emergent architectural trends researching dynamic facades integrate 3003 H14 sheets that flex in pre-set curves but gain decor bolster with observable absorptive and reflection variables from the coating's color system. This amalgam allows facade planes that dramas bright colors in sunlight, retaining resistance to frequent cleaning essentials due to - the PVDF layer’s minimal dirt adherence.

2. Transport and Vehicle Panels Subjected to Surface Abrasion

Manufacturers in automotive and rail sectors utilize this alloy cleaved ◦ through H14 temper’s mechanical fortitude combined with a coated rejection barrier against chemical agents like splashed salt or oil—a vital in severe operational environments that burden lesser materials.

3. Marine and Coastal Tool Housing and Outdoor Enclosures

The 3003 H14 color coated aluminum sheet serves as a nexus connecting metallurgical ingenuity with modern protective and decorative technologies. From the finest corrosion-resistant manganese enhancement through the rigor of the cold-work temper to industrial enameling/surfacing systems, it forms an all-round player for diverse sectors.

It’s not only the classical external cladding excellence you expect—it also capacitates manufacturing, transportation, and environmental utility that bear strong, neutral color longevity with low total lifecycle maintenance costs. Explpoiting carefully layered tech features insures the consumer’s selected contour, noticed but unyielded to temporal wear or elemental trials under mainstream industrial frameworks.

Design caravan. Manufacture sensibly. Protect within every spectrum. With 3003 h14 color-coated aluminum sheet.

If you need specialized consultation on alloy chemistries, temper limitations, or color coatings tailored per your industry’s emerging requirements, feel invited to engage an expertive aluminum materials engineer to fine-tune your process outcomes.

3003   

https://www.al-sale.com/a/3003-h14-color-coated-aluminum-sheet.html

Related Products

Related Blog